background image

11

10

Safety instructions

/// Explication of warning symbols

Indicates an (extremely) hazardous situation, which, 
if not avoided, 

will result in death, serious injury.

Indicates practices which, if not avoided,

 

can result in equipment damage.

!

Indicates a hazardous situation, which, if not avoided, 

can result in death, serious injury.

Indicates a potentially hazardous situation, 
which, if not avoided,

 can result in injury.

/// General information

 

Read the operating instructions in full before  
starting up and follow the safety instructions.

 

› Keep the operating instructions in a place where it  

can be accessed by everyone.

 

› Ensure that only trained staff work with the device.

 

› Follow the safety instructions, guidelines, occupational 

health and safety and accident prevention regulations.

Danger! (   )

Please pay attention to the dangerous parts of the equipment  
in device setup. Beware of the risk of:

 

› flammable materials

 

› glass breakage as a result of mechanical stirring power

Caution! (   )

Wear your personal protective equipment in accordance with the hazard  
category of the medium to be processed, there is a risk of:

 

› splashing of liquids

 

› projectile parts

 

› body parts, hair, clothing and jewelry getting caught

The device must only be used in a technically perfect condition.

Содержание MICROSTAR digital















Отзывы: