IKA HB digital, Инструкция по эксплуатации

Страница: 8 / 28

8
�
Before commissioning, read and observe the safety instructions�
�
Keep the operating instruction manual accessible for all users�
/// Other risks
Risk of burning at hot surfaces
The top edge of the heating bath can heat up to temperatures above 65 °C during operation�
�
Do not touch hot device components without protective gloves�
�
Only fill or empty the device when it is cold�
Risk of injury caused by explosion
�
Do not use the device in explosive atmospheres, as it is not EX-protected�
�
When using tempering media that could create explosive mixtures, take appropriate safety
measures (e�g� work under an extractor hood)�
Risk of injury caused by self-igniting tempering media
�
Only heat up tempering media with a flashpoint above the set safety temperature of the
heating bath�
�
Ensure that the set safety temperature limit is always at least 25 °C below the flashpoint of
the tempering medium in use�
�
Do not touch hot tempering media�
Risk of burns due to self-igniting tempering media (also in connection with rotary
evaporator or other devices)
�
For tempering media with a flashpoint ≤ 260 °C: Note the danger resulting from ignition of
the medium�
�
Note the danger resulting from flammable materials�
Risk of injury caused by electric shock
�
Only put together accessories with the power supply cable disconnected�
Damage to the device due to improper use
�
Empty the heating bath before transportation�
�
Never operate the heating bath without tempering medium�
�
Ensure that the specified settings on the rating plate coincide with the actual power supply�
�
Ensure that the power socket used is earthed (grounded contact)�
�
Avoid knocks or impacts to the device and accessories�
Hazards resulting from uncontrolled restart
�
After an interruption to the power supply, the device starts up again with previously set
operating mode C�
�
To cut the power supply, press the device main switch or unplug the mains or device plug�
�
After interrupting the power supply, ensure that the device is not unintentionally restarted�