IKA HB digital, Инструкция по эксплуатации

Страница: 20 / 28

20
/// Key “Lock“
/// IR interface
The operating settings can be locked by pressing and holding the key for 2 seconds, preventing
any inadvertent changes during operation� The lock symbol appears on the screen when this
function is activated� (Fig� 10)
Press and hold the key again for 2 seconds to unlock the operating settings� The lock symbol dis-
appears when function is deactivated�
Data transfer via IR interface
The heating bath transfers data via IR interfaces� These interfaces are located on the left display
side of the heating bath or on the right side of the drive unit� Do not place any objects between
the two operating units as otherwise the data transfer may be interrupted!
Remote Mode
Using the laboratory device software “labworldsoft ® ” and the rotary evaporator RV 10 digital/
control the device can be operated in “Remote” mode� In this mode, the device can no longer be
hand-operated� (Fig� 12)
Note: Please comply with the system requirements together with the operating instructions and
help section included with the software�
SET
A
TEMP.
°C
°C
2
s
SET
A
TEMP.
°C
°C
SET
A
TEMP.
°C
°C
2
s
www.