IKA Algaemaster 10, Руководство по эксплуатации

Страница: 15 / 34

15
13 Commissioning
NOTICE
Assemble the Algaemaster 10 and
all necessary accessories on a stab-
le, even, non-slip surface.
The stirrer must always be securely
fixed for safety reasons.
Prior to each use, always check the
device and accessories for damage
and proper assembly.
The power socket used must be earthed
(protective earth conductor contact).
If these conditions are met, the device is ready for operating after
plugging in the mains plug. If these procedures are not followed,
safe operation cannot be guaranteed and/or the equipment may
be damaged.
Observe the ambient conditions listed under “18 Technical Data”.
After switching off via the main switch (Fig. 3, (19)), the device
type, device designation, user-defined device name and the firm-
ware version are shown in the display.
13.1 Start screen
Pos. Function Name
a Device type Photobioreactor
b Device designation Algaemaster 10
c User-defined device name Algaemaster 10
d Firmware version Display/Logik
13.2 Firmware Update Tool
After the start screen, the information start screen for the Firmwa-
re Update Tool appears. You can use the tool to update the soft-
ware of your IKA device to the latest version. Firmware updates
contain new functions or optimisations of previous functions. You
can download the Firmware Update Tool at www.ika.de/fut.
c
a
d
b