English
4
Front panel
3
4
5
6
7
2
1
1. Instrument input - 1/4” (6.35mm) jack type - Connect your instrument here (e.g., guitar).
2. LINK output - LINK connector is wired in parallel with the INPUT: the LINK connector can be used both as
a direct unbalanced output of the INPUT signal. You can, for example, connect LINK with the input of an
amplifier. Z-TONE input impedance control also affects LINK output.
3. ON LED - this LED indicates that the unit is turned on. It will turn on when the input jack is inserted and the
unit is powered either from battery or 48V.
4. GAIN control - adjusts the input gain: center for unity gain; -8dB when fully counterclockwise, +8dB when
fully clockwise.
5. PASSIVE/ACTIVE - Pick-Up selector - this selector allows you to match the type of pick-up installed on the
connected instrument.
6. Z-TONE™ - Variable impedance control - the front control named Z-TONE™ allows you to change the input
impedance on the instrument input allowing for a unique possibility for tone shaping on your instruments.
7. JFET/PURE - Preamp topology selector - this selector allows you to select two different preamp topologies
for your connected instrument: JFET preamp type and Pure preamp type.
