manualshive.com logo in svg

Iiyama ProLite LH5580S, Руководство пользователя

Поделиться
Скачать
Iiyama ProLite LH5580S Скачать руководство пользователя страница 44

ENGLISH

42  OPERATING THE MONITOR

Adjustment Item

Problem / Option                                                      Button to Press

ADVANCED OPTION

CLOSED CAPTION

UNDERSCAN

HEAT STATUS

POWER ON DELAY

TERMINAL 

SETTING

The statuses of the cooling fan, brightness, and internal temperature are 

displayed.

The cooling fan starts running according to the operating 

temperature or when COOLING FAN is ON in the SCREEN 

SAVER menu. When the operating temperature substantially 

exceeds the operation guaranteed range, the message 

“TEMPERATURE WARNING” is displayed on the screen.

NOTE

Adjust the delayed time until the power-on mode is activated at the time of 

recovery from the sleep mode or power-on.

OFF, 2 - 50 seconds
You can select the mode to display the HDMI1, HDMI2, or DVI-D signal 

according to their signal format depending on their source device.

HDMI 

SIGNAL

1/2

HDMI

MODE

1/2

Select FULL when displaying the signal that uses all 

256 levels (from level 0 to 255). This mode is used 

primarily when input comes from a computer.

Select HDMI-HD when the source device is a video 

device.

FULL

LIMITED

Select LIMITED when displaying the signal that 

uses 16 to 235 levels of 256 levels for each of R, 

G, and B. This mode is used primarily when input 

comes from a video device.

HDMI-HD

HDMI-PC Select HDMI-PC when the source device is a PC.

DVI

MODE

Select DVI-HD when the source device is a video 

device.

DVI-HD

DVI-PC

Select DVI-PC when the source device is a PC.

OFF

CC1

CC2

CC3

CC4

TT1/TT2/

TT3/TT4

CLOSED CAPTION is turned off.
Captions are displayed in sync with the primary audio.
Information (related to the primary audio) is displayed without sync.
Captions are displayed in sync with the secondary audio.
Information (related to the secondary audio) is displayed without sync.
Four types of information not related to the displayed images 

are displayed. (For example, news and weather forecast.)

Check with each supplier of your video software and external 

video devices in advance whether they are compliant with EIA-

608-A.  

If their video signals are not compliant with it, images may not be 

displayed correctly.

NOTE

Содержание ProLite LH5580S



























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды