Iiyama ProLite LH5580S Скачать руководство пользователя страница 17

Страница: 17 / 58

ENGLISH

BEFORE YOU OPERATE THE MONITOR 15

[INSTALLING IN THE PORTRAIT OR FACE-UP POSITION]

90°

Clockwise

tra

logo

Landscape

Face-up

Face-down

The monitor can be installed in the portrait or face-up position.
Ensure that the monitor is oriented as shown below.

• The operating environmental condition (temperature) when the monitor is in the portrait or face-up

position is 0°C to 35°C.

• Proper operation of the monitor is not guaranteed when it is not mounted as shown below (upside

down, face down, etc.).

• In the portrait or face-up position, the lifetime of the backlight is shorter than that in the landscape

position.

• When the monitor is in the face-up position, be sure to set COOLING FAN to ON using SCREEN

SAVER in the CONFIGURATION1 menu of the OSD screen function.

Installation in the portrait position
The logo should be on the LEFT side when viewed from the front of the monitor.

This monitor doesn’t have a function to rotate displayed images. To display images in the portrait
orientation, use already rotated images.

Installation in the face-up position

Operation environment for portrait or face-up installation
When the monitor is installed in the portrait or face-up position, the following conditions should
be satisfied.

Temperature

0 - 35°C / 32 - 95°F

Humidity

20 - 80% (without condensation)

CAUTION

NOTE

Содержание ProLite LH5580S



























































Результаты поиска

Содержание ProLite LH5580S

Отзывы:

Бренды по названию

Популярные бренды

Iiyama ProLite LH5580S, Руководство пользователя

Результаты поиска

Содержание ProLite LH5580S

Отзывы:

Бренды по названию

Популярные бренды