Iiyama ProLite LH5580S Скачать руководство пользователя страница 12

Страница: 12 / 58

ENGLISH

10 BEFORE YOU OPERATE THE MONITOR

INSTALLATION

CAUTION



Follow the manual instructions for the type of mount you have selected. Refer all servicing to

qualified service personnel.



Moving the monitor requires at least two people.



Before installing, please make sure the wall is strong enough to hold the necessary weight of the

display and the mount.

[VENTILATION REqUIREMENTS FOR ENCLOSURE MOUNTING]

CAUTION

Don’t block these holes.

Wall

Don’t block the holes in the rear of the monitor shown in the figure above. If they are blocked,

heat accumulates inside the monitor, causing breakdown. The upper limit of the operation

guaranteed ambient temperature when the monitor is installed in the landscape position is

40°C. When installing the monitor in a case or an enclosure, ensure adequate ventilation to

keep the temperature inside the case 40°C or lower by providing a cooling fan or ventilation

holes in the case. The upper limit when the monitor is in the portrait or face-up position is 35°C.

This LCD has a temperature sensor and cooling fan. If the LCD becomes hot, the cooling fan will

turn on automatically. If the LCD becomes overheated, the “Caution” menu will appear. If the “Caution”

menu appears, stop using the monitor and allow it to cool. When the LCD display is used in an

enclosure or with protection on LCD surface, please check the inside temperature of the monitor by

“HEAT STATUS” (See page 42). If the temperature is higher than the normal level, set “COOLING

FAN” to ON using the SCREEN SAVER function (See page 35).

Содержание ProLite LH5580S



























































Результаты поиска

Содержание ProLite LH5580S

Отзывы:

Бренды по названию

Популярные бренды

Iiyama ProLite LH5580S, Руководство пользователя

Результаты поиска

Содержание ProLite LH5580S

Отзывы:

Бренды по названию

Популярные бренды