ENGLISH
40 OPERATING THE MONITOR
Adjustment Item
Problem / Option Button to Press
ADVANCED OPTION
INPUT
RESOLUTION*
1
INPUT CHANGE
BLACK LEVEL
EXPANSION*
2
UNDERSCAN
INPUT DETECT
SCAN MODE*
3
If the monitor fails to recognize the input signal resolution correctly, you
can select a proper resolution manually. Only when a signal having a
resolution close to any of the following values from three groups, the
values in the most appropriate group are selectable.
Group 1
Group 2
Group 3
AUTO, 1024 x 768, 1280 x 768, 1360 x 768, 1366 x 768
AUTO, 1400 x 1050, 1680 x 1050
AUTO, 1600 x 1200, 1920 x 1200
OFF
SOFT
HARD
BLACK LEVEL EXPANSION is turned off.
NORMAL
QUICK
Normal switching time.
Lower the black level.
Lower than the black level "SOFT".
Quick switching time.
When you select QUICK, slight noise may appear.
NOTE
OFF
AUTO
SELECT
VIDEO
SELECT
The target video inputs are DVI-D and D-SUB. When the
currently selected input signal is lost, this function checks
whether the signal is present at the other input. When
present, the other input is automatically selected. If no signal
is present at both inputs for five seconds, the monitor enters
the sleep mode. The priority of the input signal is as follows:
DVI-D > D-SUB
INPUT DETECT is turned off.
The target video inputs are HDMI1, S-VIDEO, VIDEO, and
D-SUB.
When the HDMI1, S-VIDEO, or VIDEO input is detected, the
detected input is automatically selected.
When the video signal being displayed is lost, the D-SUB
input is automatically selected.
The priority of the input signal is as follows:
HDMI1 > VIDEO > S-VIDEO
You cannot select other inputs than DVI-D and D-SUB.
NOTE
You cannot select HDMI2, DVI-D and DISPLAYPORT.
NOTE
Select the image display area.
OVERSCAN
UNDERSCAN
About 95% of the input image is displayed.
Almost 100% of the input image is displayed.
