iiNet BOB2, Руководство по эксплуатации телефонного аппарата

Страница: 9 / 32

9
Registering your BoB2™ handset
On the BoB2™ handset
After you’ve powered it up, your BoB2™ handset screen may begin flashing
with the message ‘
Please register ’. If it does, follow the simple steps
below. You usually need to register any additional BoB2™ handsets you
have purchased.
1. Press on the right side of the control key as shown to bring up the main
menu.
2. Scroll down to ‘ Settings ’ using the control key and press the display
button below ‘ OK ’.
3. In this menu, scroll down to the ‘ Handset ’ option and press ‘ OK ’.
4. Scroll down again until you hit ‘ Register H/Set ’, then press ‘ OK ’.
5. Using the keypad, enter the handset PIN number (the default is 0000)
and press ‘
OK ’..
6. You’ll see a message on the display screen that reads ‘ Regstr.Procedure
Base 1’ . You can then complete the final step below.
On the BoB2™ modem
Within 60 seconds of completing the above steps, press and hold the
centre button of the back of BoB2™ for about three seconds. It’s the one
labelled ‘
add extra h/set ’.
Following successful registration, the handset will display ‘ Base 1 ’ on the
screen. If you don’t see this message on the display screen, repeat the
above steps.