IIDA INFOBAR A01, Основное руководство

Страница: 5 / 64

3
Introduction
~ ~ ~ ~<MFZ>
ue01_as35_9e.fm
[3/3]
If the PIN code is incorrectly entered three times consecutively, the
PIN code will be locked. Use the PUK code to unlock the PIN code.
■ PIN Code
You can set the INFOBAR A01 to require PIN code entry every time
the power is turned on, to prevent unauthorized use of the au IC-Card
by a third party.
•
At the time of purchase, the PIN code is not to be required to use
phone. On the iida Home, tap
Settings
[
Location & security
[
Set up UIM card lock
[
Mark
Lock UIM card
to set the PIN code to
be required.
The PIN code is also required when setting
Lock UIM card
.
•
The initial setting of the PIN code is “1234”. On the iida Home,
tap
Settings
[
Location & security
[
Set up UIM card lock
[
Change UIM PIN
to change the PIN code to a four- to eight- digit
number.
■ PUK Code
Enter the PUK code when the PIN code is locked.
•
PUK code is an eight-digit number given at the time of purchase,
and is printed on the back side of the plastic card where your au
IC-Card is attached.
•
When you enter the PUK code, set the new PIN code with
Change
UIM PIN
.
•
If the PUK code is incorrectly entered ten times consecutively,
contact an au shop, PiPit or the Customer Service Center.
PIN Code
•
When the PIN code is locked, the INFOBAR A01 may be restarted for the
security reasons.
as35_ue.book 3 ページ ２０１１年７月２０日 水曜日 午後２時２６分