NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
2
CONGRATULATIONS!
In selecting this Innovative Hearth Products (IHP) electric fi replace, you have chosen
the fi nest and most dependable fi replace found anywhere. A beautiful and prestigious
addition to the fi nest homes.
Please read and carefully follow all of the instructions found in this manual. Please pay
special attention to the safety instructions provided in this manual. The Homeowner's
Care and Operation Instructions included here will assure that you have many years of
dependable and enjoyable service from your product.
TABLE OF CONTENTS
Packaging List ................................... page 2
Introduction ...................................... page 2
Locating Fireplace ............................. page 3
Tools/Supplies Required ................... page 3
Framing Specifi cations ...................... page 4
Fireplace Specifi cations ..................... page 4
Clearances ........................................ page 5
Pre-installation .................................. page 5
Final Finishing ................................... page 5
Break-In Period .................................. page 5
Operating Instructions ...................... page 6
Remote Control Operation ................ page 6
Back Glass ........................................ page 7
LED Strip Replacement Procedure..... page 7
Product Reference Information.......... page 8
Optional Accessories ......................... page 7
Troubleshooting ................................ page 8
Replacement Parts ............................ page 9
Warranty Certifi cate ........................... page 11
PACKAGING LIST
This assembled Electric Room Heater is
packaged with:
• One accessory package located in the
fi rebox, containing;
1 ea. Installation and Operation Manual.
1 ea. Remote Control
INTRODUCTION
This Electric Fireplace is designed for residen-
tial applications to be framed in as a fi replace.
This appliance has been tested in accordance
with UL 2021 and CSA C22.2 No. 46-M198
standards for fi xed and location dedicated
electric room heaters.
Installation must conform to local codes. In
the absence of local codes, electrical wiring
and grounding must comply with the National
Electrical Code ANSI/ NFPA 70 - latest edition.
In Canada, the current CSA C22.1 Canadian
Electrical Code - latest edition.
IMPORTANT:
Before starting your fi replace
installation, read this installation and opera-
tion manual very carefully to ensure you
understand it completely and in entirety.
Failure to follow these instructions may
result in a possible electric shock, fi re
hazard and/or injury or property damage
and will void the warranty.
WARNING
If the information in this manual
is not followed exactly, an elec-
trical shock or fi re may result
causing property damage, per-
sonal injury or loss of life.
CAUTION:
Extreme caution is necessary
when any heater is used by or near children
or invalids and whenever the heater is left
operating and unattended.
CAUTION:
This appliance is mounted on
rubber feet. The purpose of these feet is to
ensure adequate air circulation beneath the
fi replace. Do not remove these feet. Do not
install the fi replace directly onto a carpet,
rug, furniture or similar surfaces, which
could hinder or block the airfl ow.
TO PREVENT A POSSIBLE FIRE, DO NOT
BLOCK AIR INTAKES OR EXHAUSTS
IN ANY WAY. DO NOT USE NEAR SOFT
SURFACES, LIKE A PILLOW, WHERE
OPENINGS MAY BECOME BLOCKED.
THIS APPLIANCE MAY BECOME HOT
WHEN IN USE. TO AVOID BURNS, DO NOT
LET BARE SKIN TOUCH HOT SURFACES.
KEEP COMBUSTIBLE MATERIALS, SUCH
AS FURNITURE, PILLOWS, BEDDING,
PAPERS, CLOTHES AND CURTAINS AT
LEAST 3 FEET (1 METER) FROM THE
FRONT OF THIS APPLIANCE.
DO NOT OPERATE ANY HEATER WITH
DAMAGED WIRING OR CONNECTORS, OR
AFTER THE APPLIANCE MALFUNCTIONS,
OR IF IT HAS BEEN DROPPED OR DAM-
AGED IN ANY WAY.
ANY REPAIRS TO THIS FIREPLACE
SHOULD BE PERFORMED BY A QUALIFIED
SERVICE TECHNICIAN.
UNDER NO CIRCUMSTANCES SHOULD
THIS FIREPLACE BE MODIFIED. PARTS
HAVING TO BE REMOVED FOR SERVICING
MUST BE REPLACED PRIOR TO OPERAT-
ING THE FIREPLACE AGAIN.
DO NOT USE THIS APPLIANCE OUT-
DOORS. DO NOT EXPOSE FIREPLACE TO
THE ELEMENTS (SUCH AS RAIN, ETC.).
IMPORTANT
These fi replaces are designed
as supplemental heaters. There-
fore, it is advisable to have an
alternate heat source when
installed in a dwelling.
Содержание capella 27
Страница 10: ...10 NOTES...
