Setting up the Antenna
Extend the FM wire antenna fully for best reception. Do not strip, alter or attach to other antennas.
Tuning and Playing the Radio
1. Press and release the
Pairing/Mode Button
as needed to cycle through Bluetooth, FM radio and Aux-in modes.
2. When FM mode is selected, press the
+
or
– Button
to tune the radio to a desired station. The current radio frequency
appears in the lower part of the display. Press and hold the
+
or
– Button
for a few seconds to scan for the next clear
station.
3.
To memorize a station as a preset
:
A. Press the
FM
presets Button
as needed to step through the 6 presets (P1 - P6) to the number you wish to
assign, and then hold the
FM
presets Button
until the selected preset number begins flashing in the display
and 1 beep sounds.
B. Press the
+
or
– Button
to tune the radio to a desired station. Hold briefly to have the radio autoscan/search for
the next clear station.
C. Press the
FM
presets Button
to confirm the setting, two confirmation beeps will confirm the setting and the
preset number you wish to assign. Repeat steps A-C to preset up to 6 stations.
4. To listen to a preset station, press the
FM
presets Button
to choose the desired preset.
5. Press the or
Button
on the unit to adjust the system volume.
5
At the set time, the alarm will sound for 1 hour.
1. To turn off the sounding alarm and reset it to come on at the same time the following day, press and release the
Button
.
The alarm sound will stop but the alarm icon will remain in the display, indicating the alarm is armed. To turn off
the alarm without resetting it for the next day, press and release the
Alarm Button
.
2. Press and release the
Alarm Button
during normal operation (alarm is not sounding) as needed to arm the alarm (alarm
icon is present) or to cancel it (no alarm icon).
3. Press and release the
Snooze Button
while alarm is sounding to temporarily silence the alarm for the set snooze time
(default is 9 minutes). To adjust the snooze time: press and hold the
Snooze Button
during normal operation (when alarm
is not sounding). The snooze time will flash on the display and 1 beep sounds. Press the
–
or
+ Button
to adjust the
snooze time from 1 - 29 minutes. Press and release the
Snooze Button
again (or no button within 10 seconds). Two beeps
will sound to confirm snooze setting and return unit to normal operation.
Operating the Alarm
Listening to FM Radio
Page 8