In Bluetooth mode, the unit has an auto shut-off feature. If no Bluetooth audio is detected for 3 minutes, the unit will power
off. This feature does not apply in Aux or FM radio modes.
Auto Shut-off
Color Change Mode
Color Change Mode can be accessed whether the unit is ON or OFF. There are 5 color settings. Press the
Color Button
to cycle through them. The settings are:
• GLOW
Slow color change (default): Colors slowly fade from one to another through the color spectrum.
• 1 COLOR Select the current color by pressing the
Color Button
when the desired color is showing in Glow mode.
• PULSE
Light flashes/changes to the beat of playing music
• FAST
Fast color change: colors change quickly from one to another through the color spectrum.
• OFF
Turns off cabinet color effect.
TIP
: To adjust the brightness of the colors, press the
Snooze/Dimmer Button
(not active in GLOW mode).
7
When unit is in normal mode (no alarm is sounding), press the
Snooze/Dimmer Button
to cycle through High, Medium, Low,
and Off brightness settings. Settings affect both the display and cabinet LED. Dimmer function will not work during GLOW
color change mode. When LED color mode is set to OFF, pressing the
Snooze/Dimmer Button
will place unit in 1 COLOR
mode with white backlight.
Dimmer Mode
This unit has a Bedtime Sleep feature which gradually lowers the volume of playing audio over a set time then turns the unit
off.
1. Press and release the
Sleep Button
as needed to cycle to the desired sleep setting: 120, 90, 60, 30, 15 minutes or Off
(cancels sleep mode).
2. To set sleep volume, press the or
Buttons
. Sleep volume does not effect normal or alarm volume settings.
3. During sleep mode, press the
Sleep Button
to view the sleep time remaining. Press again to set sleep to the next lowest
setting.
4. To cancel sleep mode and turn the unit off, press and release the
Button
at any time during sleep mode.
Bedtime Sleep Mode
Page 10