IHI Shibaura G-EXE22-OMEGA-S9, Руководство оператора

Страница: 75 / 106

Do not allow the mower
to lurch forward.
Throttle lever
Hi 㷅 h en 㷅 ine speed
Stop
Make sure there are no people in
front, behind, or to either side.
■ Operating the mower
〈Transport by running the engine〉
!
Practice is required to transport the mower by running the
engine. Be sure to practice this procedure several times
until you can perform it safely.
1. Make sure there are no people within an area 5m in front
of you or 3m behind or to either side of you. Start the en-
gine, and assume the basic posture.
2. Place the shift knob in the " H " or " L " position.
3. Move the ▽ mark on the throttle lever to the " L " position,
and place the blade clutch lever in the stop position.
4. Securely hold the left grip with your left hand, and slowly
pull the main clutch lever into the " Run " position.
!
The mower will begin moving forward when the main clutch
becomes engaged.
!
Once you have become accustomed to and can safely op-
erate the mower with the engine running, move the mark on
the throttle lever to the "H" position to practice operating
the mower with the engine at high speed.
5. To stop the mower, move the main clutch lever forward to
the " Stop " position.
Warning
!
Before running the engine, make sure there are
no people within 5m in front of the mower, or 3
m behind and to either side of the mower.
Place the shift knob in the "H" or "L" position
and engage the main clutch. The mower will be-
gin moving forward as soon as the main clutch
is engaged. Avoid causing an accident by allow-
ing the mower to lurch forward.
!
Be sure to install the bucket before starting/
running the engine.
!
Before running the engine, make sure you un-
derstand how to stop the mower.
Important
!
Do not run the engine with the tires removed in
any areas other than on grass.
Doing so will not only damage the rear roller,
but will also bend the roller axle. A bent axle will
not turn correctly, and will not cut grass
evenly.
Operation
21