IHI Shibaura G-EXE22-OMEGA-S9, Руководство оператора

Страница: 59 / 106

■ Names and Functions of Parts
Name Function
Handle
Grip
Brake lever
Stand grip
Stand
Front cover
Blade clutch lever
Rear roller
Lower
blade adjustment
handles (left), (right)
Tires
Blade alignment clamp
Blade axis
Work roller height adjust-
ment knobs (left), (right)
Front roller height adjust-
ment knobs (left), (right)
Front roller
Work roller
Blades
Work roller clutch knob
Engine switch
Fuel tank
Main clutch lever
Throttle lever
Bucket
Fuel cock
Recoil starter
Strainer
Air cleaner
Muffler
Choke lever
Oil gauge
Blade height gauge
(optional)
!
Hold the grips to maintain the position and change the direction of the
mower during operation.
!
Hold the grips when operating the mower.
!
This lever is used to engage the brakes and stop the progress of the
mower.
!
These grips are used when engaging/releasing the stand.
!
This stand is used to support the front roller and the mower when remov-
ing/installing the tires.
!
The front cover prevents the operator from becoming caught in and in-
jured by the clutch and transmission, which transmit the power from the
engine. Do not remove the cover while operating the mower.
!
This lever is used to "Start" and "Stop" the blades.
!
This roller is used to move the mower after removing the tires.
!
These handles are used to adjust the gap between the blades. One handle
is on the left side and one is on the right side.
!
These tires are used when transporting the mower to a workplace.
!
This clamp is used to manually rotate the blades.
!
This bolt is used during wrapping work.
!
These knobs are used to adjust the height of the work roller from the
ground. One knob is on the left side and one is on the right side.
!
These knobs are used to raise/lower the front roller to adjust blade height.
!
This roller is used to maintain the blades at a given height above the
ground to cut the grass at the determined height.
!
This roller is used to remove dead grass, and align grass grain and feed it
to the blades.
There are three types of rollers : a grooming cutter, thatching reel, and
brush reel.
!
These blades are used to cut grass.
!
This knob is used to switch between "Forward", "Stop", and "Reverse" for
the work roller.
!
This switch is used to start and stop the engine. To start the engine,
move the switch to "ON". To stop the engine, move the switch to "OFF".
!
This tank holds the fuel.
!
This lever is used to transmit power from the engine to the various parts,
and switch between "Start" and "Stop".
The blades and work roller will rotate only when this lever is in the "Start"
position.
!
This lever is used to adjust the speed of the engine.
!
The bucket is used to collect grass cuttings, and to prevent the operator
from coming into contact with the blades and/or the mower.
!
This knob is used to supply fuel.
!
The starter is used to start the engine when the handle is pulled.
!
The strainer removes air and contaminants from the fuel.
!
The air cleaner prevents dust and contaminants from entering the air
sucked into the engine.
!
The muffler is used to reduce the noise of the engine.
!
The choke lever is used to increase the fuel mix when starting a cold en-
gine.
!
The oil gauge is used to check the remaining volume and contamination
level of engine oil.
!
The blade height gauge is used to fix the front roller and work roller at a
specified height, by using screws in two locations to set blade height and
bring the front and rear rollers into contact.
Names of Parts
5