IHI Shibaura G-EXE22-OMEGA-S9, Руководство оператора

Страница: 66 / 106

Bucket fittings
Front roller height
adjustment knob
■ Installing the bucket
〈Installing the bucket〉
1. Insert the bucket down between the round bar and plate
on the left and right bucket clamps, and between the left
and right front roller height adjustment knobs, until it stops.
2. Make sure the bucket is installed firmly, is not angled, and is not caught on the mower.
■ Engaging the stand and removing/
installing the tires
〈Engaging/releasing the stand〉
Engaging the stand
1. Grab the horizontal section of the handle with your left
hand, hold the stand grip with your right hand, and then
place your right foot on the stand and press it to the
ground.
Do not remove your right foot from the stand.
2. While pressing the stand to the ground with your right
foot, pull the stand grip up and toward you.
!
The stand becomes engaged, the mower is supported by
the front roller and the stand, and the tires are lifted from
the ground.
!
In this position, you can now remove/install the tires.
Releasing the stand
1. Firmly grab the stand grip with your right hand, and press the stand down with your right foot.
2. Hold the horizontal section of the handle with your left hand, and carefully push the mower forward with
both hands while being careful to keep your right foot pressing down on the stand.
!
The stand is released, and the tires (rear rollers) come down to the ground.
3. Make sure the tires (or the rear rollers if the tires have been removed) are on the ground before carefully
removing your right foot from the stand and allowing it to return to its original position. (This is easy to per-
form by hooking your shoe on the return pin on the right side of the stand.)
Warning
!
Be sure to install the bucket before performing
mowing work or operating the mower.
Warning
!
Be sure to engage/release the stand in a level
area where the mower will not move on its own,
before removing/installing the tires.
4. Preparations before Operation
12