IHI IHIMER CARRY 107, Руководство по эксплуатации

Страница: 15 / 48

2 INSTRUCTIONS FOR USE
MINIDUMPER
CARRY 107
9
2.2.3 STARTING OF DIESEL ENGINE MOTOR.
1. Check that diesel cock, under the tank, is opened.
2. Put the accelerator lever (E) in the intermediate position.
3. Turn the key (I) in “ON” position. The indicators (N) “oil
pression” and (M) “battery charge" light up.
4. Turn the key (I) in “START” position until the engine
starts up. Free the key (I) after start up. The indicators
(N) and (M) switch off. Do not operate start up engine
more than 15 sec. If the engine does not start up in 15
sec., let cool the engine during 2 minutes before
restarting up. Put the key (I) in “OFF” position before
retrying to start up.
5. Decrease the engine speed to allow the warming .
2.2.4 SWITCH OFF DIESEL ENGINE MOTOR.
Put the accelerator lever (E) at minimum speed, put the key (I) in “OFF”
position and pull the red button “STOP” (L) till the engine switches off.
2.2.5 DIESEL ENGINE MOTOR ELECTRIC SCHEDULE.
SHEATH
CONNECTOR FEMALE
ON THE MOTOR
YELLOW
WHITE GREEN
RED
OIL PRESSURE
SENSOR
RED
GREEN WHITE
YELLOW
CONNECTOR MALE
ON THE STARTER CABLE
SHEA
T
H
15/54
RE
D
YELLOW
BLACK
15
30
50
G
R
EEN
WHITE
30
/1
KEY SWITCH
BLACK
CHARGE
WARNING LAMP
OIL PRESSURE
WARNING LAMP
2.3 WARMING THE MACHINE.
As for all hydraulic systems, it is very important that the oil reach its operating temperature before starting work.
The time required for warming can be spent performing a few simple maintenance checks. Before carrying out
operations at full load carefully follow the instructions given below:
1
Allow the engine to warm up slowly at low speed for 5 minutes.
2 Operate the tool holder cylinder to warm the hydraulic components quicker.
N
M
I
E
L
Stop
(OFF)
Operation
(ON)
Start
(START)
KEI SWITCH