IHI 9VX3, Руководство по обслуживанию

Страница: 113 / 136

MAINTENANCE
9VX3
Change the Air Cleaner Element
The air cleaner is equipped with a “Service-Signal”
indicator located on the outlet side of the air cleaner.
With the engine running, check indicator each day.
If red signal is in the service level, clean filter
element or replace if necessary. Inspect filter
gaskets for damage and replace if necessary.
1. Stop the engine.
2. Release the two latches and remove the dust
pan.
3. Remove the filter element from the air cleaner
housing.
4. Clean the inside of the air cleaner housing.
5. Remove the element holder from the dust pan
and clean the element holder.
6
. Install a new filter element. Install and secure
the dust pan with arrow point upward.
7. Reset the dust indicator by pushing in the reset
button.
f ! l C A U TIO N !
Service the air cleaner only with the
engine stopped. Engine damage could
result.
Check the Travel Drives Oil Level
f ! l C A U TIO N !
When the quantity of oil is found to have increased
abnormaly, it is necessary to check the oil seal of the travel
motor.
If the seal is leaking, contact a IHI dealer.
1. Position one travel drive with oil drain plug ® at the bottom.
2. Remove the oil level/fill plug © oil should be to the bottom of
the level plug opening.
3. Add oil through the opening of oil level/fill plug
©
if
necessary.
4. Clean the plugs
©
Install the plugs
®.
5. Perform procedure on the other travel drive.
Oil level / fill plug
® Drain plug
4 - 8 - 4