8
/
14
BATTERY HANDLING AND USAGE
The battery charge will be displayed on the LED screen after each measurement. And when the monitor is connected
to the “iHealth MyVitals” APP, the battery charge will be displayed in the APP. If the power is less than 25%, please
charge the battery.
The monitor will not work until the battery has enough power.
• When the monitor needs charging, please connect the monitor to a power source.
• You should charge the battery when the battery is less than 25% charged. Overcharging the battery may reduce its
lifetime.
• When in charging mode, the charging status will be displayed on the LED screen. See the table below for details.
Monitor Status
Status Indicator
Charging
battery level symbol rolling
Fully charged
battery level symbol steady
Battery charge <25%
battery level and charge symbol
flashing
Battery low
charge symbol flashing (for a few
seconds)
Do not change the battery. If the battery can no longer be charged, please contact Customer Service.
Overcharging the battery may reduce its lifetime.
Lithium battery replacement by inadequately trained personnel could result in a hazard such as a fire or explosion.
Do not plug or unplug the power cord into the electrical outlet with wet hands. If the AC adapter is abnormal,
please change the adapter.
Do not use the monitor while charging.
Do not use any other type of AC adapter as it may harm the monitor.
The monitor, cable, battery and cuff must be disposed of according to local regulations at
the end of their usage.
Note: The battery has limited charge cycles and may eventually need to replaced by an iHealth service provider.
Battery life and charge cycles vary by use and settings.
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
SOLUTION
Low Battery
Battery do not have enough power Charge the battery
LED display reads
Pressure
system
is
unstable Retest, make sure not to move
