5
/
14
TAKING YOUR BLOOD PRESSURE READING
a.
Press the START/STOP button, the monitor will activate and all display characters
are shown for self-test. You can check the LED screen display according to the righ
picture. Please contact the service center if symbol is missing.
b.
Then the cuff will be slowly inflated. The blood pressure and pulse will be measured
during inflation. Inflation will stop as soon as the blood pressure and pulse rate have
been calculated and displayed on the screen. The result will be automatically stored
in the memory, and all results will be uploaded to the App automatically upon the
next successful Bluetooth connection.
c.
During measurement, you can press the START/STOP button to turn off the
monitor manually.
d.
After measurement, the monitor will turn off automatically after 60 seconds if no
operation. Alternatively, you can press the START/STOP button to turn off the
monitor manually.
Note: Please consult a health care professional for interpretation of pressure measurements.
BLUETOOTH FUNCTION
Connect to iOS Device via Bluetooth
a. Enable Bluetooth on your iOS device.
b. Launch the iHealth MyVitals App from your iOS device.
c. When a successful connection has been established, the Bluetooth indicator light will light up.
d.
When sync is processing, the sync indicator will flash , when sync is finished,
the sync indicator lights up
for 2 seconds and then light off.
Connect to Android Device via Bluetooth
a. Enable Bluetooth on your Android device.
b. Launch the iHealth MyVitals App from your Android device.
c. When a successful connection has been established, the Bluetooth indicator light will light up.
d. When sync is processing, the sync indicator will flash , when sync is finished,
the sync indicator lights up
for 2 seconds and then light off
.
Bluetooth connected
Syncing
Syncing
Sync finished
Note: The monitor will turn off Bluetooth function to save power under battery low status (when the monitor can no
longer take blood pressure readings), and turn Bluetooth function on when charger is plugged in.
