www.igm.cz
26
Návod k obsluze CZ
Operating Instruction EN
www.igmtools.com
5.2.2 Feeder assembly (
pic.4)
- Mount the swivel joint (3) onto the stand (2) and
screw in using the lever (4).
Mounting hole pattern / Montage Lochbild / Image de montage
JPF-1, JPF-2….Light duty (hole pattern 63x63mm, M10)
JPF-3….Light-Heavy duty (hole pattern 90x108mm, M12)
JPF- 34/ 48….Heavy duty (hole pattern 90x108mm, M12)
ŠROUB M10
LEHKÝ PROVOZ
TĚŽKÝ PROVOZ
LEHKÝ-TĚŽKÝ PROVOZ
POKUD JSI NEJSTE JISTI ROMĚRY
ZÁKLADNY
!POZOR! - zkontrolujte si měřítko zda
opravdu odpovídá
ŠROUB M12
pic.3
- Secure the joint with the lever (15D-3, pic.6). Push the
pipe (17D-1) through the openings on the side and use
it to tighten the foot using the wing screw 17D-2 (pic.6)
- Disassemble the arm holder
- Assembly of the joint part of the arm.
Push the arm with a joint through the metal
grommet. So that the joint stays in the grommet.
(pic.5)
pic.4
2
5
3
4
6
9
8
7
1
pic.5
pic.6
- Place the part with a lever on the feeder arm and
load the gear. (pic.7)
- Use three screws (18D-3, pic.8) to cover the arm
holder.
pic.7
- Fit the thumbscrew through the opening with a
gear.(pic.9)
pic.8
- Place the locking lever into the free opening on the
arm holder and secure with a nut.
Screw the locking lever into the nut. (pic.10)
- Mount the arm holder onto the rotating joint and
tighten the locking lever (5, pic.4)
