Igloo MONIKA 2, Руководство пользователя

Страница: 15 / 40

en
15
User manual Monika 2, Rota www.igloo.pl
4. EXPLOITATION
Temperature of the cooled space and aggregate operating cycle may fl uctuate. They depend on numerous factors,
such as amount and temperature of products placed in the device and temperature of the surroundings.
The device should be placed in a dry and well-ventilated place, ensuring proper air exchange (distance between the
wall and the device – min. 10 cm), out of sunlight, kept far from heat sources and devices enforcing air
fl ow (ceiling
and portable ventilators, blow-in heaters). The device functions properly in a room, where temperature falls within
appropriate climatic class stated on the data plate. The operation of the device may worsen when it shall operate in
temperature lower or higher than the stated temperature range.
Remarks and indications
• It is necessary to properly level the display cabinet, which will prevent loud operation of the device and shall
ensure proper water (condensate) out fl ow during defrosting.
• After transporting the device, wait about 2 hours before its actuation.
• The
fi rst fi lling of cooling space should be performed after its previous cooling to working temperature. This
principle should also be observed after longer pause in exploitation.
• Do not block any ventilation holes, which would hamper circulation of the cooled air. It is also necessary to
ensure proper air fl ow around the device (aggregate ventilation holes cannot be covered).
• Ensure even load on shelves, do not exceed their maximal load and do not exceed maximal loading.
• Keep the condenser clean. Impurities may lead to overheating of the compressor and as a consequence may
result in damage of the device, which is not covered by warranty.
• Do not use electric devices inside grocery product storing chamber.
• After closing the door of the device, it is not recommended to open it with force. Negative pressure created
inside the device is levelled within 1-2 minutes, which allows easy opening of the door.
• Avoid unnecessary opening of doors and leaving them open for a longer period of time.
1 2 3
1
2
3
4
2
1
1
1
2
2
Fig.5 Assembly/disassembly of night screens
1 – Lower night screen (shorter one) – mounted as the fi rst one
2 – Upper night screen (longer one) – mounted as the second one
3 – “Leaf” of the aluminium lamp (hides and secures the night screens before
falling out)
4 – Night screen guide (aluminium pro fi le)
Fig.6 Condensate container
1 – Rail water outlet hose (condensate out fl ow after condenser evaporation)
2 – Condensate container (empty the condensate!!!)
Fig.7 Control panel
1 – Main switch (turns on/off the aggregate of the device)
2 – Lighting switch
3 – Thermostat (temperature regulator) panel
(service details in Chapter No.7 p.19 and 20)