ENGLISH
11
CLEANING & MAINTENANCE
General Cleaning
General cleaning should be performed as needed
and only takes five minutes or less.
1. Clean the cabinet surfaces using a soft cloth and warm, soapy water. Rinse.
2. Wipe dust in the back of the water cooler to improve efficiency.
3. Remove drip tray cover and hand wash. Take a cloth and warm, soapy water
to rinse the inside of the drip tray. Rinse.
4. Reattach drip tray.
Cleaning Water Tanks
Cleaning the water tanks is recommended
to happen once every three months.
NOTE
: Recommended to do before
loading a new 3 or 5 gallon jug.
1. Unplug power cord from outlet.
2. Remove water cooler bottle.
3. For hot and cold water dispensers,
twist the bottle receptacle of the smart
device counterclockwise and pull it up.
4. Take apart the non-spill
system and hand wash
it with warm, soapy water. Rinse and reassemble.
5. Empty both tanks (hot and cold) by unplugging the drain
cap of the hot tank at the back of the unit.
6. Clean the inside parts of the water dispenser system, using vinegar or a
2% citric acid solution to remove mineral scaling caused by the water.
7. Rinse well, then open the drain cap for the hot water tank to get the water out.
8. Put all the parts back and securely fasten the drain cap.
9. Let the unit dry for two hours before plugging it back in
and install the bottle receptacle (smart device).
Cleaning Ice Maker
•
Remove the ice and water separator and ice storing plate by
unscrewing the screw with a screwdriver (not included).
•
Wash inside parts of ice-making chamber with warm, soapy water.
•
Rinse and open the drain cap to drain all water. Rinse it several times.
•
Securely fasten the drain camp and after it's dry, install them
back to original position with screwdriver (not included).
Smart Device
Smart Core
Water Separator
of cold tank
Cold tank
Содержание IWCTLICM353CRHBKS
Страница 3: ......
