6
IGEL
Technology GmbH
IGEL Zero HDX
5.09.100
Introduction
IGEL
Thin Clients
comprise the very latest hardware and an embedded operating system. Depending on the
product concerned, this operating system may be based on
IGEL Linux
or
Microsoft Windows Embedded
Standard
®
. We have done our utmost to provide you with an excellent overall solution and promise to
provide the very same level of quality service and support.
1.
Quick Installation
To install the thin client in your network environment, proceed as follows:
Connect the thin client as follows to the necessary devices and the network:
1.
-
Monitor (VGA, DVI, DisplayPort)
-
AT-compatible keyboard with PS/2 or USB connection
-
USB mouse
-
LAN via RJ45 plug connection
Connect the thin client to the power supply.
2.
Start the thin client and wait until the graphical user interface has loaded.
3.
Click on
in the taskbar.
4.
Specify the system language and keyboard layout under
User Interface > Language
.
5.
Specify the resolution and the number of screens under
User Interface > Display
.
6.
If you would like to specify the IP address manually, enter it in the
Network > LAN Interfaces
section.
7.
Click on
OK
to confirm your changes.
8.
The device will restart if necessary and will use the new settings thereafter.
A handy tool tip is available for virtually every setting. If you would like to know more about a
setting or option, move your mouse pointer over it and wait for a moment. You can configure
the behavior of tool tips under
User Interface > Desktop
. Further information can be found
under
Desktop
(page 93).
