155
IGEL
Technology GmbH
IGEL Zero HDX
5.09.100
Network initialization
•
Network authentication successful (802.1x or WPA)
•
No further network settings used
After network DNS
•
Runs after each change in the IP address or host name
•
IP address / name server settings used (e.g. via DHCP)
Before network services
•
IP address / name server settings used
•
VPN connected (if VPN autostart was enabled in the setup)
•
No network / host routing settings used
Final network command
•
Network / host routing settings used
•
NFS and SMB drives available
•
System time synchronized with time server
•
UMS settings retrieved but not effective
Desktop commands
Menu path:
Setup > System > Firmware Configuration > Custom Commands > Desktop Commands
Desktop commands
run each time the X server starts. The commands are executed at the following times:
Desktop initialization
•
Runs once during the boot procedure
•
Desktop environment configured but not launched
•
User not logged on (Kerberos, Smartcard etc.)
Before desktop start
•
Runs once during the boot procedure
•
Desktop environment launched
•
Message service launched
•
Session D-Bus launched
•
User not logged on (Kerberos, Smartcard etc.)
Final desktop command
•
Runs after each user logon and desktop restart
•
User logged on (Kerberos, Smartcard etc.)
•
User desktop launched
