IGBT MIG-200M, Руководство пользователя

Страница: 6 / 21

5
3. MAIN PARAMETERS
3.1 Technical parameters table:
MODEL MIG-200M
Input voltage (V) 1ph 230V, 50Hz
Welding mode MIG/FLUX MMA TIG
Input current (A) 34 33 21
Input power(KVA) 7.5 7.2 4.7
No-load voltage(V) 60 60 60
Welding current(A)
range (A)
30~200 20~175 20~175
Welding voltage(V) 15.5~24 21~27 10.8~17
Rated duty cycle 35% 35% 35%
Welding wire dia.(mm) 0.6-1.0 N/A N/A
Electrode dia.(mm) N/A 1.0-4.0 N/A
Efficiency 85%
Power factor 0.7
Protection class IP21S
Insulation class F
* Note: The duty cycle is tested at 40°C has been determined by simulation.
* Note: The Machine with PFC version, can works under the input voltage from 85V to 260V.
While the input voltage is lower than 145V, it will switch to low voltage working mode
automatically, and the output power will be limited. Please restart the machine to recover
to the full output power, after input voltage gets to be higher than 145V.
3.2 Power supply:
MODEL MIG-200M
Input voltage (V) 1ph 220V, 50Hz
Min. Power
Power Grid 9.5 KVA
Generator 12 KVA
Input Protection
Fuse 32 A
MCB 32 A