IGBT MIG-200M, Руководство пользователя

Страница: 12 / 21

11
6. OPERATION
6.1 Operation steps:
Please power on the welder, open the gas bottle valve, and adjust the gas pressure to suitable
scale. If not using the spool gun, please select the torch type at “ ” position on the internal
panel.
For the details, please refer to the example below, which is for MIG with mixed gas.
When machine is turn on, please press the central adjusting knob to enter the main menu, after
the program initialization is finished.
Rotate the central adjust knob to select the welding mode
to MIG STEEL C25, and then press the knob to enter this
mode.
The program will guide you the connection for the welding
cable, please do as per request and then press to
continue.
Rotate the knob to select the welding wire diameter and
then press the knob to next step.
Rotate the knob to select the welding material thickness
and then press the knob to enter the pre-welding status.