36
IGBT D
IMMER
R
ACKS
Installation
& Operation
Configuring RCM Using Guardian (continued)
Properties
With one or more dimmers selected, Right click and select Properties or select Properties from the Tool Bar.
Mark any field <no change> to the leave data as is.
DMX Port A / DMX Port B (Pathport®)
Set the starting DMX number.
All Same Address all selected dimmers will be set to this address.
Consecutive Address dimmers will be set to consecutive addresses.
ote
: Sort the circuit column descending for reverse order.
Presets
Set the priority for Local Presets.
Priority
The highest level of all inputs set to Primary will be the output level.
If all Primary sources are missing the highest of the Fallback levels will be output.
Inputs set to
Ignore
will not be used by the dimmer.
Press
OK
to send Data to the system.
