iGage iG9 User Manual
19
Front Panel: Sv
The Sv screen shows:
Total number of Satellites (Sv’s) Used / Tracked
GPS n
umber of Satellites (Sv’s) Used / Tracked
BDS number of Satellites (Sv’s) Used / Tracked
GLO number of Satellites (Sv’s) Used / Tracked
GAL number of Satellites (Sv’s) Used / Tracked
Click the Fn button to display status for:
GPS L1, L2, L5
BDS B1, B2, B3
Click the Fn button to display status for:
GLO L1, L2, L3
GAL L1, L2, L3
Click on the Fn button again to return to the main menu.
Front Panel: Receiver Mode
The Mode screen allows selection of the receiver operation mode:
Base External UHF
Base Internal UHF
Base APIS
Base External UHF & APIS
Rover APIS
Rover UHF
Rover NTRIP
(Back)
Use the Fn button to move down to the desired mode to modify. Then click Enter to select. Each
mode has questions appropriate to the specific mode.
Note that if you select any of the Base modes, the receiver always does a ‘Read GPS’ and
sets the
Base position to the current Autonomous or SBAS/WAAS value.
Mode Selection Descriptions:
Base External UHF
Format
sCMRx, RTCM2.3, RTCM3, RTCM3.2, RTD, CMR, CMR+
OK
Cancel
