17
iGage iG9 User Manual
Front Panel Operation
You can configure your iG9 receiver:
from the front panel using the two-button interface
from a data collector connected by Bluetooth to the
receiver.
This section describes operation using the buttons from the front
panel interface.
Main Menu
After the iG9 starts, the Status Overview Menu will be shown
Clicking either button
or
will display the Main Menu:
You can move the current selection
through each of the items ‘
Info, Sv, Mode, Power, Data,
Set’
by
clicking the Fn (Left) button:
Fn / Next
Once the desired item is selected, click the Enter (right) button:
Power / Enter
Some menu pages have too many lines to fit on the display, click the Fn / Next button to scroll down
through the additional lines.
The Main Menu
If the overview menu is shown, or the screen is blank:
click the Fn button to display the Main Menu: