iGage iG5, Руководство пользователя

Страница: 36 / 96

iG5 User Manual 36
FEET: If you measure up in feet, you can enter the height in
decimal feet and put an 'F' after the measurement. The
program will automatically convert to Meters for you.
SLANT HEIGHT in Meters: If you measure a slant height, enter
an ‘S’ after the measurement and the program will compute
the vertical height for you.
SLANT HEIGHT in FEET: If you measure a slant height in feet,
enter ‘SF’ or ‘FS’ after the measurement and the program will
compute the vertical height in Meters for you.
Note: if you use the ‘PPP Service’ = ‘RTX (CenterPoint)’ the
submitted RINEX file spoofs a ‘UNKNOWN EXT NONE’ and
adjusts your actual HI to reflect the generic antenna L1 offset.
'Default Agency'
Enter your company code here. This value is placed into every
RINEX file that is exported. You can override this value on a
file-by-file basis.
Typically the Agency is 2 to 10 characters in length however
the RINEX definition allows values up to 40 characters in
length.
'Default Operator'
Enter the default name of the operator / observer here. This
value is placed into every RINEX file that is exported. You can
override this value on a file-by-file basis.
Typically the observer is 2 to 10 characters or the operator’s
initials, however the RINEX definition allows values up to 20
characters in length.
'Decimate OPUS Submission to ...'
(Hidden when Simple)