IFYIL GT-15, Руководство пользователя

Страница: 57 / 100

56
O - Close
| - Open
It is recommended to have a fire extinguisher in order to
prevent a fire.
• Please keep away heat sensitive materials from boiler (flammable, explosive
etc.).
4.2. Electrical Connections
First insert the power cable into the back of the boiler, then insert
the cable outlet. Opening the back of the boiler on / off switch to turn
on your boiler, bringing the open position.
A voltage regulator using is required in
areas with voltage irregularities. Electronic and
electronic card failures that may occur due to
the absence of a voltage regulator are not
covered by the warranty.
Use your boiler and running in a socket with ground.
4.3. Plumbing Schema
• 120 cm and longer radiator must be connected to the installation with a
reverse connection.
• Hydro boile r’s connections must be made with conical iron union.
• Installation should be with fill and drain valve in definitely.
• Safety valve is installed on body.
• Safety valves must be in the water outlet. The safety valve is mounted on
the body.
• Boiler lit (off) the water pressure should be in the range of 1-1,5 bar.
Otherwise drain / refill valve should be checked.
• It is recommended to install a thermostatic valve in the radiators to
ensure that the room temperature can be kept to the desired degree and
to provide high comfort at low cost.
• Hot water circulation pump, Bridge valve, Mixing valve shall be supplied
by the user. The TS 1258 “ Rules for Calculation for Installation Water
Supply on Building ” Standard must be observed in the selection of these
equipment.