IFYIL GT-15, Руководство пользователя

Страница: 89 / 100

Smoke extraction motor failed. Clean the smoke duct.
Boiler is working a few minutes and then off
The ignition cycle is not completed. Re-run the ignition cycle (turn off).
There may be a temporary failure
in the power supply.
Check the conditions indicating a top.
Temperature sensors are defective
or damaged. Check and call technical service for replace
sensors as necessary.
Smoke duct is clogged Clean smoke duct.
There may be temporary failure in
the electricity supply.
Check the plug and replace if necessary.
The pellets are stacked into the combustion bowl,
cover glass gets dirty very quickly and the flames
are burning low.
Insufficient combustion air comes
Check that it is edible by the boiler room
constantly fresh air.
The pellets could not damp or
appropriate.
Change the type of pellets.
Exhaust fan failure
Chec k. İf nec essary, call tecnichal service for
Replacing the flue fan motor
Fan and Screw Calibration can be
performed. Menu> Combustion management> Fan
Calibration and Screw calibration adjustable
Not enough vacuum is available for
fresh air intake.
Check the wicks, the air ducts and the cover.