IFYIL AVANOS, Руководство пользователя

Страница: 21 / 51

20
 Chimney cap should be used to prevent the flow into the chimney flue
repercussions of windy weather and rain.
 Concrete blocks are affected by temperature changes, concrete flat roof
which is in direct contact with the air must be absolutely isolated.
 Chimney cleaning cap should be under the flue pipe, chimney cleaning
should be done here.
 An accurate and sufficient flue system for smoke extraction (a chimney with
natural traction that does not backfire in the event of a power outage.) is
necessary.
 Necessary precautions should be taken to prevent condensate formed in the
chimney from reaching the boiler.
 Clogging or closing of the flue outlet poses a great danger.
Stoves must be connected to a chimney duct which can move
vertically smoke outside the building or its flue pipe to the
highest point of the building. Chimney connections, if that
would be considered illegal in the first combustion fumes can
cause the wall to infiltrate the processing of these leaks may
leave traces. Leaked smoke and / or flames can cause burns or
fire because it can be very hot.
4.6. Smoke Pipe Instructions
 Smoke pipe connections are very important; therefore, it must be done
carefully.
 The connections of smoke pipes must be made according to the guarantee
conditions.
 The minimum safety opening surface sections should be 15%. Slope in the
horizontal section of the pipe should be 3-5%. (3-5 cm per meter). The
horizntal chimney's duct should not be longer than 2 m.
 The stove chimney pipe inner diameter is 130 mm (For star 150mm).
 Smoke pipe should be made of durable materials for heat, corrosion and
condensation.
 The stove pipe should not be extended by piercing the window or wall to
prevent the smoke gas from getting warmer and quieter.