IFYIL AVANOS, Руководство пользователя, Страница: 45 / 51

 Pump circulation is not
working 
 There is an air jam in the
pump. 
 The air in the pump will be
automatically thrown away. 
 The air inside the pump can
not be dispensed. 
 There may be an air jam in
the pump wheel. 
 Check the lights on the pump.
Information on lights is included in the
userguide.

 The stove overheats even
though the air clap is minimized.

 In front of the air flap, a
foreign substance may have arrived.

 Take out the ashpit from your
stove and clean the front of the air clap.

 Stoves and chimneys often
are pitch 
 Poor quality coal use   Clean around the air clap by
removing the rear sub-sheet of the stove. 
 Fuel usage not recommended
by our company in the stove 
 Change the fuel 
 Burning at low temperature or
exceeding capacity 
 Do not burn the stove at low
temperatures. Make sure the heat of the
furnace can meet your needs.

 Inadequate combustion air   Check the ventilation of the room
where the stove is placed. 
 Inadequate chimney draft   Increase the chimney draught. 
 Although the stove is at the
desired temperature, the ambient is
not warming up.

 Installation problem 
 There may be air in
installation system. 
 Isolation failure
 Selection of stove in
insufficient heat power 
 Check the pipe insulation, building
insulation and radiator quantity-dimensions. 
 Select the stove suitable for the
ambient temperature need 
