SU2020 SU8020 SU2021 SU8021 SU2621 SU8621
Ultrasonic flow meter
50
•
[OFF]: The simulation is not active.
10.6.7.2 Parameter setting via IO-Link: simulation
u
Select [Parameter] > [Simulation].
u
Select [S.Tim] and set the time of the simulation in minutes.
u
Select [Parameter] > [Simulation] > [Flow].
u
Select [S.FLW] and set the flow value to be simulated or a fault condition (e.g. OL).
u
Select [Parameter] > [Simulation] > [Temperature].
u
Select [S.TMP] and set the temperature value to be simulated or a fault condition (e.g. OL).
u
Select [Write to device].
w
The changed values are transferred to the unit.
u
Select [Parameter] > [Simulation].
u
Execute command: [Start Simulation].
w
The simulation starts with the set values.
u
To end the simulation: Execute command: [Stop Simulation].
10.7 Identification
10.7.1 Device information
Unalterable device information is stored on the unit. This includes:
•
Product name
•
Product family
•
Manufacturer
•
Manufacturer ID
•
Device ID
•
Serial number
•
Hardware / firmware revision
•
Description
In addition, further freely definable tags with a maximum length of 32 characters can be assigned to
the unit via the IO-Link interface using suitable parameter setting software. This includes:
•
application-specific tag
•
function tag
•
location tag
Read/edit device information:
u
Select [Identification].
u
Read device information or edit editable parameters.
10.7.1.1 Reading via the unit keys: device information
u
Go to the [EF] > [d.InF] menu.
u
Read the unit information.
