IFM SB03 Series, Руководство по эксплуатации

Страница: 18 / 31

SB1xxx SB2xxx SB3xxx SB4xxx SB5xxx SB6xxx SB7xxx SB8xxx SB9xxx SB03xx Mechatronic flow
sensor
18
2
1
FOU=On
[% MEW] MAW MEW
[mA]
20
4
22
21,5
130 120
3,5
Err OL
FOU=OFF
3
4
5
Fig. 15: Output characteristics of the analogue output, flow
1: Analogue signal MAW: Initial value of the measuring range
2: Flow MEW: Final value of the measuring range
3: Measuring range OL: Above the display range
4: Display range Err: Error state
5: Detection zone
FOU=OFF
133
272
122 100
252 212
-32 -10 -43
-26 14 -46
UL Err Err OL
FOU=On
[mA]
20
22
21,5
3,5
MAW MEW
[°C]
[°F]
4
2
1
3
4
5
Fig. 16: Output characteristics of the analogue output, temperature
1: Analogue signal MAW: Initial value of the measuring range
2: Temperature MEW: Final value of the measuring range
3: Measuring range OL: Above the display range
4: Display range UL: Below the display range
5: Detection zone Err: Error state
10.3.2.1 Parameter setting via unit keys: Analogue signal
ü Standard unit of measurement is selected: [EF] > [CFG] > [uni.x].
ü
Process value for OUT2 is selected: [EF] > [OUT2] > [SEL2].
u
Call up the menu [EF] > [CFG].
u
Select [ou2] and set the function: I: Analogue signal 4...20 mA.
10.3.2.2 Parameter setting via IO-Link: Analogue signal
ü
Standard unit of measurement is selected: [Parameter] > [Display setting] > [uni.x].
ü
Process value for OUT2 is selected: [Parameters] > [Output configuration] > [SEL2].
u Call up [Parameters] > [Output Configuration].
u Select [ou2] and set the function: I: Analogue signal 4...20 mA.