IFM SB03 Series, Руководство по эксплуатации

Страница: 13 / 31

Mechatronic flow sensor SB1xxx SB2xxx SB3xxx SB4xxx SB5xxx SB6xxx SB7xxx SB8xxx SB9xxx
SB03xx
13
EF
DIS
coLr
SELd FLOW TEMP
GrEn rEd
diS d2 d3 d1
rd1 rd2 rd3 OFF
r1ou G1ou
r2ou G2ou
Fig. 12: Display settings [DIS] menu
8.2 Available parameters
Parameter Explanation
CFG Change to the submenu CGF (basic settings)
CGA Calibration factor in % for adapting the measured value curve to the application
colr Colour configuration of the display
dAA Damping time in seconds for analogue signal flow
dAP Damping time in seconds for switching signal flow
DIS Change to the submenu DIS (display settings)
diS Update rate and orientation of the display
EF Change to the submenu EF (extended functions)
FEPx Frequency end point for OUTx = Upper measured value at which the frequency signal set under
FrPx is output.
FHx Upper limit for switching signal OUTx with window function
FLx Lower limit for switching signal OUTx with window function
FOUx Behaviour of output OUTx in case of an error
FrPx Frequency signal that is output when the upper measured value (MEW or FEPx) is reached.
FSPx Frequency start point for OUTx = Lower measured value from which a frequency signal is output
(only for temperature measurement).
Hi.T Maximum temperature value measured
Lo.T Minimum measured temperature value
MEM Change to the submenu MEM (memory)
oux Output configuration for output OUTx (e.g. switching output with hysteresis function)
P-n Output logic
rES Reset to factory settings
rPx Reset point for switching output OUTx with hysteresis function
SELd Standard process value of the display
SELx Process value for output OUTx
SPx Switch point for switching output OUTx with hysteresis function
uni.F Standard unit of measurement for flow
uni.T Standard unit of measurement for temperature