Multicode Reader
O2I5xx
5
2 Safety instructions
•
The unit described is a subcomponent for integration into a system.
– The system architect is responsible for the safety of the system.
– The system architect undertakes to perform a risk assessment and to create documentation in
accordance with legal and normative requirements to be provided to the operator and user of
the system. This documentation must contain all necessary information and safety instructions
for the operator, the user and, if applicable, for any service personnel authorised by the
architect of the system.
•
Read this document before setting up the product and keep it during the entire service life.
•
The product must be suitable for the corresponding applications and environmental conditions
without any restrictions.
•
Only use the product for its intended purpose (
Ò
Intended use).
•
If the operating instructions or the technical data are not adhered to, personal injury and/or damage
to property may occur.
•
The manufacturer assumes no liability or warranty for any consequences caused by tampering with
the product or incorrect use by the operator.
•
Installation, electrical connection, set-up, operation and maintenance of the product must be
carried out by qualified personnel authorised by the machine operator.
•
Protect units and cables against damage.
2.1 Laser safety
The unit has two laser markings with a wave length of 655 nm to help align the field of view.
Visible laser light; LASER CLASS 1.
EN/IEC 60825-1:2007 and EN/IEC 60825-1:2014
complies with 21 CFR Part 1040 except for deviations pursuant to Laser Notice No. 50, dated June 2007.
CLASS 1
LASER
PRODUCT
IEC 60825-1: 2014
21CFR PART 1040
Fig. 1: Position of the product label
CLASS 1
LASER PRODUCT
Fig. 2: Warning sign
2.2 Photobiological safety
The unit has four illumination LEDs that can be switched on independently of each other.
•
O2I5x0, O2I5x2 and O2I5x4:
The illumination LEDs emit visible light with a wavelength of 617 nm. The unit complies with the
free group according to EN 62471:2008.
•
O2I5x1, O2I5x3 and O2I5x5:
The illumination LEDs emit invisible infrared light with a wavelength of 850 nm. The unit complies
with the free group according to EN 62471:2008.
