O2I5xx
Multicode Reader
8
4 Function
The device checks and monitors code content, code properties and code quality. To do this, it creates
image captures with set applications.
The device outputs the results via an Ethernet-based interface (process interface).
In addition, the device has 2 switching outputs for controlling external devices.
4.1 Overview of device functions
•
Integrated, configurable code evaluation
•
Read different code types with one application
•
Process interfaces:
– O2I50x: Ethernet TCP/IP and EtherNet/IP
– O2I51x: Ethernet TCP/IP and PROFINET
•
Parameter setting interface: Ethernet TCP/IP
•
Control of the switching outputs via the active application or externally via process interface
•
Automatic setting of focus, illumination and code parameters during the configuration
•
Internal illumination
•
Control of external illumination units possible
•
Internal and external triggering of image captures
•
Data processing with function blocks and logical links in the unit
•
Integrated ifm mass storage device saves current configuration for easy device replacement.
Optional storage of error images
4.2 Web front end
The unit has a web front end via which the following information can be retrieved:
•
device documentation
•
device set-up
•
error images
•
licences
u
Enter the IP address of the unit in a web browser. Example:
4.3 Triggering image captures
1...5 parameter sets can be defined for image captures.
Image captures for code recognition are triggered by an internal or external trigger signal. Depending
on the selected trigger mode, the images are then captured accordingly.
•
Internal triggering
– Images are captured continuously with a fixed frame rate.
– Setting via ifmVisionAssistant or teach app.
•
External triggering
– Image capture activated by external trigger source (switching signal of a connected sensor) via
the trigger input.
– Image capture activated by process interface command (PLC) via Ethernet.
