18
The teach app is available for the following operating system:
Fig� 9: Link to Android app
Fig� 10: Link to iOS app
7.1.3 Lock teach button
The teach button can be locked using the ifm Vision Assistant (→ software
manual)� In the following situations, the teach button is automatically locked:
• The device is configured by the ifm Vision Assistant (exception: If the ifm Vision
Assistant is in the monitor mode, the teach button is unlocked)�
• The unit is protected by a password�
8 Set-up
After power on, the device is put into operation� After 30 seconds, the device is in
the evaluation mode where saved applications are executed� The indicators signal
the current operating state (→ 7).
The device's reading quality is affected when being stored at high air
humidity (>80%)�
►
Store the device in an environment with low air humidity before putting
it into use�
Up to 32 applications can be saved on the device� An application can be
activated in two ways:
• ifm Vision Assistant software
• process interface command
To protect the hardware, the device is equipped with over temperature
protection� This may become active in the case of
• a high ambient temperature,
• a high image repetition rate and
• a long exposure time�
If the over temperature protection is active, no images will be captured�
The over temperature protection will be deactivated as soon as the internal
temperature of the device has decreased�