9
UK
5 Installation
During installation note the following:
►
Use the E2D500 mounting set�
►
Use 2 M4 screws to fix the device applying 2�1
Nm max�
The M4 drill holes are 7 mm deep�
►
Depending on the surface of the object to be
monitored, install the device in front or above the
object�
►
Avoid back light, scattered light and changing
light conditions�
►
Avoid installation in heavily polluting areas of the
machine�
►
Use strain reliefs for cables connected to the
device�
Fig� 3: Installation with clamp and E2D500 mounting set�
If the device is permanently used in wet areas, the nut of the M12 Industrial
Ethernet cable (e�g� E11898) may corrode� Use a cable with a high-grade
stainless steel nut for permanent use in wet areas�
It is possible that the devices mounted side by side interfere due to
simultaneous exposure�
Available accessories: www�ifm�com