IFM KQ10 Series, Руководство по эксплуатации

Страница: 18 / 35

18
6.3 Installation on the tank
The unit can be attached to tank walls by means of double-sided adhesive tape
(available as accessory E12677). Using different adhesive tape may lead to the
unit detaching from the tank and is done at your own risk� The adhesive tape used
must not contain any conductive material�
Fig� 8: Installation on the tank
The sensor must be flush to the tank� Curved, flexible tanks may lead to
measurement errors and malfunction�
If curvature of the tank cannot be avoided, the sensor elements at the edge
of the sensor that are affected by the curvature can be deactivated
(→ 10.2.1) �