IFM E89005, Руководство по эксплуатации

Страница: 10 / 53

Electronic Preset Counter E89005
10
5.2 Connections
9 Connections
9.1 Signal and Control Inputs
N° Designation Function
1 24 VDC/80 mA Sensor supply
voltage
2 GND (0 VDC) Common connection
Signal and Control
inputs
3 INP A Signal input A
4 INP B Signal input B
5 RESET Reset input
6 LOCK Keypad lock
7 GATE Gate input
8 MPI User input
9.2 Supply voltage and Outputs
9.2.1 Version with relays
N° Designation Function
9 Relay contact C.1
10 Relay contact N.O.1
Output 1
11 Relay contact C.2
12 Relay contact N.O.2
13 Relay contact N.C.2
Output 2
14 AC: 90..260 VAC N~ Supply voltage
15 AC: 90..260 VAC L~ Supply voltage
10 Technical Data
10.1 General Data
Display LCD positive backlite
2 x 6-digit
Digit height upper line 9 mm
lower line 7 mm
special characters 2 mm
Overload/ Blinking, 1 s
Underload Counter loses up to 1 decade
no pulses
Data retention > 10 years, EEPROM
Operation 8 keys
10.2 Pulse counter
Count frequency max. 55 kHz (see section 13.
frequencies typ.)
Response time of the outputs:
Relays
Add/Sub/Trail < 7 ms
With automatic repeat < 7 ms
A/B ; (A-B)/A < 29 ms
10.3 Tacho/Frequency meter
Frequency range 0,01 Hz to 65 kHz (see
section 13. frequencies typ.)
Measuring 76.3 Hz Time interval
principle (period measurement)
> 76.3 Hz Gate time
Gate time approx.13.1 ms
Measuring error < 0.1% per channel
Response time of the outputs:
1-channel operation < 100 ms @ 40 kHz
< 350 ms @ 65 kHz
2-channel operation < 150 ms @ 40 kHz
< 600 ms @ 65 kHz
10.4 Timer
Seconds 0.001 s ... 999 999 s
Minutes 0.001 min ... 999 999 min
Hours 0.001 h .. 999 999 h
h.min.s 00h.00min.01s ...
99h.59min.59s
Min. time measurable 500µs
Measuring error < 50 ppm
Response time of the outputs:
Relays < 7 ms
en
gl
is
h
Seite 17
Terminals
5.2.1 Signal and control inputs
Terminal Designation Function
1 24 V DC / 80 mA Sensor supply voltage
2 GND (0 VDC) Common connection signal and control inputs
3 INP A Signal input A
4 INP B Signal input B
5 RESET Reset input
6 LOCK Keypad lock
7 GATE Gate input
8 MPI User input
5.2.2 Supply voltage and outputs
Terminal Designation Function
9 Relay contact C1 Output 1
10 Relay contact NO1
11 Relay contact C2 Output 2 (changeover contact)
12 Relay contact NO2
13 Relay contact NC2