UK
ecomatController CR710S/CR711S
27
ifm electronic gmbh ● Friedrichstraße 1 ● 45128 Essen
We reserve the right to make technical alterations without prior notice!
22� Nov� 2017
CR710S / page 8
CR710S
Connector A / output characteristics
Control systems
PWM output (PWM
H
)
Output frequency
20���2000 Hz (per channel)
Pulse/pause ratio
1���1000 ‰ (adjustable via software)
Resolution
1 ‰ FS (at 20���250 Hz)
Range diagnostics min - max�
0 A / 2�5 A (default)
Current-controlled output (PWM
I
)
Output frequency
20���2000 Hz (per channel)
Control range
0�05���2�5 A
Setting resolution
1 mA (at 20���250 Hz)
Control resolution
2 mA
Load resistance
≥ 4.8 Ω / (at 12 V
)
≥ 9.6 Ω / (at 24 V
)
Accuracy
± 1�5 % FS (for inductive loads)
Range diagnostics min - max�
0 A / 2�5 A (default)
Connector A:
OUT0001
OUT0003
OUT0005
OUT0101
OUT0103
OUT0105
Switching voltage
8���32 V
Switching current
0�025���2�5 A
Protective circuit for inductive
loads
integrated
Accuracy current feedback
5 %
Diagnostics current feedback
confi gurable minimum and maximum values
to detect short circuit and wire break
Diagnostics status feedback
detection of short circuit to VBB and short
circuit to GND
Digital outputs 2.5 A
(OUT PMW-25-B)
Digital output (B
H
)
Range diagnostics min - max�
0 A / 2�5 A (default)
PWM output (PWM
H
)
Output frequency
20���2000 Hz (per channel)
Pulse/pause ratio
1���1000 ‰ (adjustable via software)
Resolution
1 ‰ FS (at 20���250 Hz)
Range diagnostics min - max�
0 A / 2�5 A (default)
Connector A:
OUT3000
for sensors and joysticks
5 V, 400 mA / 10 V, 200 mA, accuracy ± 5 %
short-circuit proof and overload protected
Sensor supply
(OUT SUPPLY-A)
Connector A:
OUT3001
Voltage range
8���32 V
Current rating
< 5 mA
Output voltage
0���10 V
Accuracy
± 5 % FS
Analogue outputs
(OUT VOLTAGE-A)
Output groups VBB
0/1
Load current per output group
≤ 12 A
