IFM CR710S, Руководство по установке

Страница: 25 / 43

UK
ecomatController CR710S/CR711S
25
ifm electronic gmbh ● Friedrichstraße 1 ● 45128 Essen We reserve the right to make technical alterations without prior notice! 22� Nov� 2017 CR710S / page 6
CR710S Connector A / input characteristics
Control systems
Digital input (B
L/H
) Input resistance 10 k Ω
Input frequency < 330 Hz
Switch-on level > 0�7 VBB
30
Switch-off level < 0�3 VBB
30
Accuracy B
L/H
± 1 %
Range diagnostics confi gurable minimum and maximum values
for the measuring range to detect short circuit
to VBB and short circuit to GND / wire break
Range diagnostics min - max� 1 V / 0�95 VBB
30
(default)
Connector A:
IN0400...0401
IN0900...0901
Resolution 12 bits
Input frequency < 330 Hz
Range diagnostics confi gurable minimum and maximum values
for the measuring range to detect short circuit
to VBB and short circuit to GND / wire break
Digital/ resistor inputs
(IN RESISTOR-A)
Digital input (B
L
) Input resistance 10 k Ω
Switch-on level > 0�7 VBB
30
Switch-off level < 0�3 VBB
30
Accuracy B
L
± 1 %
Range diagnostics min - max� 1 V / 0�95 VBB
30
(default)
Resistor input (R)
Measuring current < 2�0 mA
Measuring range 0.016...30 kΩ
Accuracy ± 2% FS: 0.016...3 kΩ
± 5 % FS: 3...15 kΩ
± 10 % FS: 15...30 kΩ
Range diagnostics min - max� 0 Ω / 31 kΩ (default)
Observe the notes on the confi guration of the inputs/outputs!
(Programming manual "ecomatController CR710S")
Abbreviations A
B
H
B
L
FRQ
L/H
PWM
H
PWM
L
PWM
I
R
VBB
0/1
VBB
30
analogue
binary high side (CSO)
binary low side (CSI)
frequency/pulse inputs confi gurable low side (CSI) / high side (CSO)
pulse-width modulation high side (CSO)
pulse-width modulation low side (CSI)
pulse-width modulation current-controlled
resistance input
supply output group via semiconductor switch
supply sensors/module