IFM CR1200, Руководство по установке

Страница: 20 / 30

Process and dialogue module PDM360 NG-12
20
ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen We reserve the right to make technical alterations without prior notice! 18�04�2017 CR1200 / page 2
CR1200 Technical data
Control systems
Electrical data
Operating voltage 10���32 V DC
Overvoltage detection
Overvoltage switch-off
Undervoltage detection
Undervoltage shutdown
Accuracy
Short-circuit protection / reverse
polarity protection
if U
B
< 32 V
if U
B
> 34 V (hysteresis 1 V, i�e� switch-on again at U
B
< 33 V)
if U
B
< 10 V
if U
B
< 8 V (hysteresis 1 V, i�e� switch-on again at U
B
> 9 V)
3 % FS
electronic
Current consumption approx� 750 mA (without external load at 24 V DC)
Processor MPC5121, 32 bits, 400 MHz
Memory (total) 256 Mbyte RAM / 128 Mbyte fl ash / 1 Gbyte internal mass storage
Memory allocation see system manual PDM360 NG-12
www.ifm.com → Data sheet search → CR1200 → More information
Interfaces
CAN 1���4 CAN interface 2�0 A/B, ISO 11898
50 Kbits/s���1 Mbit/s
CANopen, CiA DS 301 version 4, CiA DS 401 version 1�4
or SAE J 1939 or free protocol (Raw CAN)
max� current load VBB
C
≤ 400 mA (protected by multi fuse)
Ethernet transmission rate 10/100 Mbits/s
USB 2 x USB 2�0 full speed, transmission rate up to 12 Mbit/s
USB master operation (service and maintenance connection for keyboard, mouse etc�)
output current per interface ≤ 500 mA
Analogue video input 2 FBAS inputs, 1 Vss, 75 ohms (inputs selectable)
supported video standards: PAL and NTSC
cable length: ≤ 30 m
Input confi gurable
digital for positive / negative sensor signals
analogue 0���10, 0���32 V, 0���20 mA, ratiometric
Output digital, positive-switching (high side), supply via terminal 30
Input characteristics Resolution 8 bits
Accuracy ± 3 % FS
Current input 0���20 mA Input resistance 390 Ω
Input frequency 10 Hz
Voltage input 0���10 V Input resistance 65.6 kΩ
Input frequency 10 Hz
Voltage input 0���32 V Input resistance 50.7 kΩ
Input frequency 10 Hz
Voltage input ratiometric Input resistance 50.7 kΩ
Input frequency 10 Hz
Digital input Input resistance 3.2 kΩ
Input frequency 10 Hz
Switch-on level > 0�7 U
B
Switch-off level < 0�3 U
B
Output characteristics Switching voltage 10���32 V DC
Switching current ≤ 1 A
Free wheel diodes integrated