UK
Process and dialogue module PDM360 NG-12
11
4.3.2 Mounting steps
►
Attach damping strips to the device�
Damping strips
Attached damping strips
►
Screw the set screws into the M5 thread on the back of the device�
(→ 4.2.1 Locator for mounting accessories)
Select the set screws in accordance with the panel thickness�
Panel thickness
Set screws
1���5 mm
M5 x 35
> 5���10 mm
M5 x 40
►
Insert the device into the cut-out�
►
Screw the fixing profiles to the back of the device�
Tightening torque of the M5 hexagon nuts: 5
±0�5
Nm
A
Mounting principle
1: M5 hexagon nuts, washers and fixing profiles
2: Panel cut-out
3: Dialogue module with attached damping strips
and tightened set screws
Installation depth A = device depth (approx. 53 mm)
The fixing profiles and set screws from the
installation kit do not protrude from the device�
