![background image](http://html1.mh-extra.com/html/ifm/al1330/al1330_operating-instructions-manual_3887894105.webp)
IO-Link master with EtherCAT interface DataLine 4 ports IP 65 / IP 66 / IP 67
105
>
Mapping: Device Status (0xF100)
34039
Bit
7
6
5
4
3
2
1
0
Error Code
Port State
Legend:
▪
[Error Code]
Error code of the IO-Link Device
Note If more than one error occure at the same time.
only one error will be shown. The other error
messages will be surpressed.
0x0
No error
0x3
Invalid Device ID
0x4
Invalid Vendor ID
0x7
Invalid cycle time
0x8
Invalid length of PD In
0x9
Invalid length of PD Out
0xA
No device detected
0xB
Supply voltage low or short circuit
0xD
Unspecified error
▪
[Port State]
State of the IO-Link port
0x0
Deactivated
0x1
Digital Input
0x2
Digital Output
0x3
OP: IO-Link, Operate state
0x4
STOP: IO-Link, not Operate state (fault
or no device)
0x5
PreOP: IO-Link, device in PreOP state